VRA Online Store

Set of 2 VRA Coaters

VRA Bottle Opener with either the VRA Logo or Vulcan Riders USA National Rally Logo.

Sport-Tek Moisture Wicking VRA T-Shirt

USA Logo - VRA Embroidered Ball Cap.
One Size Fits All - Hook & Loop Fastener
Structured Low Profile
Lightweight breathable cotton

Zip Up Hoodies are printed on front (small logo), back (large logo), and down both sleeves if desired. (Vulcan right sleeve & Riders left sleeve). These are printed to order, so please allow a little more time for delivery, a minimum of three weeks to ship once you order. Also make sure you choose the color you want from the color drop down, and if you would like the sleeves printed.

REMEMBER THESE ARE CUSTOM MADE TO ORDER AND TAKE A MINIMUM OF THREE WEEKS TO BE SHIPPED TO YOU.

ALL SWEATSHIRTS & HOODIES WE WARANTY FOR ANY DEFECTS IN WORKMANSHIP FOR 30 DAYS. IT IS HIGHLY RECOMMENDED BY OUR SUPPLIER THAT YOU WASH AND DRY YOUR SWEATSHIRT / HOODIE WITH MILD DETERGENT THAT DOES NOT CONTAIN FABRIC SOFTENER, DO NOT ADD FABRIC SOFTENER, OR USE DRYER SHEETS FOR THE FIRST WASHING.

Our garment decorating method is created with Commercial Siser HTV – HTV is either a polyurethane (PU) or poly vinyl chloride (PVC) film that is used with a carrier sheet to adhere to the garment for decoration. Cutters and/or lasers are used to cut HTV and then it is applied to the article of your choice. Siser HTV is 90 microns/3.5 mils thick, lightweight, breathable and comes in gloss, semi-gloss or matte finish, adheres direct to garment and lays flat on material, if you look at it closely you will find it actually melds with the grain of the garment. Highly durable and when done correctly will outlast the life of the garment, has a 20% stretch that normal plastisol screen printing does not offer, so less chance for breakage and/or peeling. It is CPSIA Certified so can be used on any garment from newborn and up.

50 percent cotton, 50% polyester
Double Needle Stiching throughout
Pill-resistant air jet yarn

1.25" x 3" Non Chapter Member patch
FREE Domestic shipping in the USA

Beautiful VRA gremlin bells to keep you and your ride safe !

Hoodies are printed on front (small logo), back (large logo), and down both sleeves if desired. (Vulcan right sleeve Riders left sleeve) These will be printed to order, so please allow a little more time for delivery,a minimum of three weeks to ship to us once you order.Also make sure you choose the color you want from the color drop down, and if you want the sleeves printed or not.

REMEMBER THESE ARE CUSTOM MADE TO ORDER AND TAKE A MINIMUM OF THREE WEEKS TO BE SHIPPED TO YOU.

Our garment decorating method is created with Commercial Siser HTV – HTV is either a polyurethane (PU) or poly vinyl chloride (PVC) film that is used with a carrier sheet to adhere to the garment for decoration. Cutters and/or lasers are used to cut HTV and then it is applied to the article of your choice. Siser HTV is 90 microns/3.5 mils thick, lightweight, breathable and comes in gloss, semi-gloss or matte finish, adheres direct to garment and lays flat on material, if you look at it closely you will find it actually melds with the grain of the garment. Highly durable and when done correctly will outlast the life of the garment, has a 20% stretch that normal plastisol screen printing does not offer, so less chance for breakage and/or peeling. It is CPSIA Certified so can be used on any garment from newborn and up.

These t-shirts are the basic VRA shirt. Made of high quality cotton, they are made to hold up to the abuse that only bikers can put them through. Please choose your shirt size in the drop menu below.

Warm and cozy knit caps ,in black or yellow embroidered with the VRA logo on the front

10" Vulcan Riders USA Patch.
FREE Domestic shipping in the USA

Standard 4" embroidered sew on patch .
FREE Domestic shipping in the USA